Varla Eagle One V2.0 Charger
The Varla Eagle One V2.0 uses a 58.8V charger with a GX16 3-pin (round, screw-on).
You need:
An official Varla charger
Before you buy
Match the voltage on your old charger's label; chargers with different voltages can share the same plug.
Varla Eagle One V2.0
Stock changes often, so availability may vary by store.
Look for the UL safety certification mark on your charger's label.
Specs
| Brand | Varla |
|---|---|
| Type | Electric scooter |
| Battery voltage | 52V |
| Match | Check before buying |
Common questions
Can I use a universal charger on the Eagle One V2.0?
A universal charger is not recommended. Use the charger made for this model.
How do I know my charger is bad?
Common signs: the charger light stays the same color (or never lights) when plugged into the scooter, the battery never reaches full, the brick gets very hot or smells burnt, or a multimeter reads no voltage (or far below the rated output) at the plug. Also check the cable and plug pins for damage.
Where can I buy a replacement charger for the Varla Eagle One V2.0?
Varla's official store has the charger shown on this page.