Varla Eagle One Pro Charger
The Varla Eagle One Pro uses a 67.2V charger with a GX16 3-pin (round, screw-on).
You need:
A 67.2V 1.75–5A charger with a GX16 3-pin plug
Before you buy
Match the voltage on your old charger's label; chargers with different voltages can share the same plug.
Tip: Amps can be equal to or lower than the original.
Charger
Official Varla charger
- Output
- 67.2V 1.75–5A
- Plug
- GX16 3-pin
More details
- Output
- 67.2V 1.75–5A
- Plug
- GX16 3-pin
- Type
- External brick
Compatible alternatives (not made by Varla)
Questions about fit? Ask the seller before buying.
We may earn a small commission if you buy through these links, at no extra cost to you.
Stock changes often, so availability may vary by store.
Specs
| Brand | Varla |
|---|---|
| Type | Electric scooter |
| Battery voltage | 60V |
| Charger output | 67.2V 1.75–5A |
| Plug | GX16 3-pin (round, screw-on) |
| Match | ✓ Confirmed match |
Common questions
Can I use a universal charger on the Eagle One Pro?
Only use one that outputs 67.2V 1.75–5A and has the GX16 3-pin plug.
How do I know my charger is bad?
Common signs: the charger light stays the same color (or never lights) when plugged into the scooter, the battery never reaches full, the brick gets very hot or smells burnt, or a multimeter reads no voltage (or far below the rated output) at the plug. Also check the cable and plug pins for damage.
Where can I buy a replacement charger for the Varla Eagle One Pro?
Varla's official store, Amazon, or the other store listed above have the charger shown on this page.