Yume Y10 Charger
The Yume Y10 uses a 58.8V charger with a GX16 3-pin (round, screw-on).
You need:
An official Yume 58.8V 2A charger
Before you buy
Match the voltage on your old charger's label; chargers with different voltages can share the same plug.
Charger
Official Yume charger
More details
- Official charger output
- 58.8V 2A
- Type
- Brand-specific charger
Use only the Yume charger specified for your model.
All models that use this chargerStock changes often, so availability may vary by store.
Specs
| Brand | Yume |
|---|---|
| Type | Electric scooter |
| Battery voltage | 52V |
| Official charger output | 58.8V 2A |
| Match | Check before buying |
Common questions
Can I use a universal charger on the Y10?
A universal charger is not recommended. Use the charger made for this model.
How do I know my charger is bad?
Common signs: the charger light stays the same color (or never lights) when plugged into the scooter, the battery never reaches full, the brick gets very hot or smells burnt, or a multimeter reads no voltage (or far below the rated output) at the plug. Also check the cable and plug pins for damage.
Where can I buy a replacement charger for the Yume Y10?
Yume's official store has the charger shown on this page.