Segway-Ninebot ZT3 Pro Charger
The Segway-Ninebot ZT3 Pro uses a 53.6V charger. The plug type has not been confirmed.
You need:
A 53.6V 1.3A (70W) charger
Before you buy
Match the plug on your old charger's label.
Match the voltage on your old charger's label; chargers with different voltages can share the same plug.
Charger
Official Segway charger
- Output
- 53.6V 1.3A (70W)
- Plug
- Segway proprietary
More details
- Output
- 53.6V 1.3A (70W)
- Plug
- Segway proprietary
- Type
- External brick
- Notes
- Optional fast charger. Your scooter also works with its standard charger.
We may earn a small commission if you buy through these links, at no extra cost to you.
Stock changes often, so availability may vary by store.
Specs
| Brand | Segway-Ninebot |
|---|---|
| Type | Electric scooter |
| Battery voltage | 48V |
| Charger output | 53.6V 1.3A (70W) |
| Plug | Segway proprietary |
| Match | ✓ Confirmed match |
Segway-Ninebot Charger Guide: Which Charger Does Your Model Use?
Common questions
Can I use a universal charger on the ZT3 Pro?
A universal charger is not recommended.
How do I know my charger is bad?
Common signs: the charger light stays the same color (or never lights) when plugged into the scooter, the battery never reaches full, the brick gets very hot or smells burnt, or a multimeter reads no voltage (or far below the rated output) at the plug. Also check the cable and plug pins for damage.
Where can I buy a replacement charger for the Segway-Ninebot ZT3 Pro?
Segway's official store or Amazon have the charger shown on this page.