Segway-Ninebot E22 Charger
The Segway-Ninebot E22 uses a 42V charger with a round 8mm (small round plug).
You need:
A 42V 1.7A (71W) charger with a round 8mm plug
Before you buy
Match the voltage on your old charger's label; chargers with different voltages can share the same plug.
Tip: Amps can be equal to or lower than the original.
Charger
Official Segway charger
- Output
- 42V 1.7A (71W)
- Plug
- round 8mm
More details
- Output
- 42V 1.7A (71W)
- Plug
- round 8mm
- Type
- External brick
- Notes
- original 42V 1.7A (BCTA+71420-1700)
Compatible alternatives (not made by Segway)
Questions about fit? Ask the seller before buying.
We may earn a small commission if you buy through these links, at no extra cost to you.
Stock changes often, so availability may vary by store.
Specs
| Brand | Segway-Ninebot |
|---|---|
| Type | Electric scooter |
| Battery voltage | 36V |
| Charger output | 42V 1.7A (71W) |
| Plug | round 8mm (small round plug) |
| Match | ✓ Confirmed match |
Segway-Ninebot Charger Guide: Which Charger Does Your Model Use?
Common questions
Can I use a universal charger on the E22?
Only use one that outputs 42V 1.7A (71W) and has the round 8mm plug.
How do I know my charger is bad?
Common signs: the charger light stays the same color (or never lights) when plugged into the scooter, the battery never reaches full, the brick gets very hot or smells burnt, or a multimeter reads no voltage (or far below the rated output) at the plug. Also check the cable and plug pins for damage.
Where can I buy a replacement charger for the Segway-Ninebot E22?
Segway's official store, Amazon, eBay, or the other store listed above have the charger shown on this page.