Segway-Ninebot C2 Charger
The Segway-Ninebot C2 uses a 25.2V charger with a DC 5.5x2.1mm.
You need:
A 25.2V charger with a DC 5.5x2.1mm plug
Before you buy
Match the voltage on your old charger's label; chargers with different voltages can share the same plug.
Tip: Amps can be equal to or lower than the original.
Charger
Official Segway charger
- Output
- 25.2V
- Plug
- DC 5.5x2.1mm
More details
- Output
- 25.2V
- Plug
- DC 5.5x2.1mm
- Type
- External brick
- Notes
- original assembly C2/C2 Pro/E2/E2 Plus
Compatible alternatives (not made by Segway)
Questions about fit? Ask the seller before buying.
We may earn a small commission if you buy through these links, at no extra cost to you.
Stock changes often, so availability may vary by store.
Specs
| Brand | Segway-Ninebot |
|---|---|
| Type | Electric scooter |
| Battery voltage | 21.6V |
| Charger output | 25.2V |
| Plug | DC 5.5x2.1mm |
| Match | ✓ Confirmed match |
Segway-Ninebot Charger Guide: Which Charger Does Your Model Use?
Common questions
Can I use a universal charger on the C2?
Only use one that outputs 25.2V and has the DC 5.5x2.1mm plug.
How do I know my charger is bad?
Common signs: the charger light stays the same color (or never lights) when plugged into the scooter, the battery never reaches full, the brick gets very hot or smells burnt, or a multimeter reads no voltage (or far below the rated output) at the plug. Also check the cable and plug pins for damage.
Where can I buy a replacement charger for the Segway-Ninebot C2?
Segway's official store, Amazon, or eBay have the charger shown on this page.