RideableCharger

Razor E Prime III Charger

The Razor E Prime III uses a 42V charger with a Razor mini 3-prong (small plug with 3 pins).

You need:

A 42V 1A charger with a Razor mini 3-prong plug

Before you buy

Match the voltage on your old charger's label; chargers with different voltages can share the same plug.

Tip: Amps can be equal to or lower than the original.

Razor E Prime IIIRazor E Prime III scooter.

Charger

Official Razor charger

Part number
W15155010214
Output
42V 1A
Plug
Razor mini 3-prong
More details
Output
42V 1A
Plug
Razor mini 3-prong
Type
External brick
Official Razor charger

Compatible alternatives (not made by Razor)

Compatible charger at Monster Scooter PartsCompatible charger on eBay

Questions about fit? Ask the seller before buying.

All models that use this charger

We may earn a small commission if you buy through these links, at no extra cost to you.

Stock changes often, so availability may vary by store.

Look for the UL safety certification mark on your charger's label.

Specs

BrandRazor
TypeElectric scooter
Battery voltage36V
Charger output42V 1A
PlugRazor mini 3-prong (small plug with 3 pins)
Match✓ Confirmed match

Scooter Charger Plug Types: A Visual Guide

Common questions
Can I use a universal charger on the E Prime III?

Only use one that outputs 42V 1A and has the Razor mini 3-prong plug.

How do I know my charger is bad?

Common signs: the charger light stays the same color (or never lights) when plugged into the scooter, the battery never reaches full, the brick gets very hot or smells burnt, or a multimeter reads no voltage (or far below the rated output) at the plug. Also check the cable and plug pins for damage.

Where can I buy a replacement charger for the Razor E Prime III?

Razor's official store, eBay, or the other store listed above have the charger shown on this page.

Other Razor models