Nami Burn-E 2 Charger
The Nami Burn-E 2 uses a 84V charger. The plug type has not been confirmed.
You need:
A 84V 1.4–5A charger
Before you buy
Match the plug on your old charger's label.
Match the voltage on your old charger's label; chargers with different voltages can share the same plug.
Nami Burn-E 2
Look for the UL safety certification mark on your charger's label.
Specs
| Brand | Nami |
|---|---|
| Type | Electric scooter |
| Battery voltage | 72V |
| Charger output | 84V 1.4–5A |
| Plug | GX16 3-pin (round, screw-on) |
| Match | Check before buying |
Common questions
Can I use a universal charger on the Burn-E 2?
A universal charger is not recommended.
How do I know my charger is bad?
Common signs: the charger light stays the same color (or never lights) when plugged into the scooter, the battery never reaches full, the brick gets very hot or smells burnt, or a multimeter reads no voltage (or far below the rated output) at the plug. Also check the cable and plug pins for damage.
Where can I buy a replacement charger for the Nami Burn-E 2?
Contact Nami's support for an original replacement.