Kaabo Wolf Warrior X Charger
The Kaabo Wolf Warrior X uses a 84V charger. The plug type has not been confirmed.
You need:
A 84V 1.4–5A charger
Before you buy
Match the plug on your old charger's label.
Match the voltage on your old charger's label; chargers with different voltages can share the same plug.
Kaabo Wolf Warrior X
Charger
Official Kaabo charger
- Output
- 84V 1.4–5A
- Plug
- GX16 3-pin
More details
- Output
- 84V 1.4–5A
- Plug
- GX16 3-pin
- Type
- External brick
Stock changes often, so availability may vary by store.
Look for the UL safety certification mark on your charger's label.
Specs
| Brand | Kaabo |
|---|---|
| Type | Electric scooter |
| Battery voltage | 72V |
| Charger output | 84V 1.4–5A |
| Plug | GX16 3-pin (round, screw-on) |
| Match | ✓ Confirmed match |
Common questions
Can I use a universal charger on the Wolf Warrior X?
A universal charger is not recommended.
How do I know my charger is bad?
Common signs: the charger light stays the same color (or never lights) when plugged into the scooter, the battery never reaches full, the brick gets very hot or smells burnt, or a multimeter reads no voltage (or far below the rated output) at the plug. Also check the cable and plug pins for damage.
Where can I buy a replacement charger for the Kaabo Wolf Warrior X?
Kaabo's official store has the charger shown on this page.
Other Kaabo models
- Mantis 10Mantis 1060V · 67.2V 1.75–5ACheck your charger's label
- Mantis 10 ProMantis 10 Pro60V · 67.2V 1.75–5ACheck your charger's label
- Mantis V2Mantis V260V · 67.2V 1.75–5ACheck your charger's label
- Mantis King GTMantis King GT60V · See original listing
- Wolf Warrior 11 / Wolf GTWolf Warrior 11 / Wolf GT60V · 67.2V 1.75–5ACheck your charger's label
- Wolf King GTWolf King GT72V · 84V 1.4–5A