RideableCharger

Kaabo Wolf King GT Pro Charger

The Kaabo Wolf King GT Pro uses a 84V charger with a GX16 3-pin (round, screw-on).

You need:

A 84V 1.4–5A charger with a GX16 3-pin plug

Before you buy

Match the voltage on your old charger's label; chargers with different voltages can share the same plug.

Tip: Amps can be equal to or lower than the original.

Kaabo Wolf King GT Pro

Charger

Official Kaabo charger

Output
84V 1.4–5A
Plug
GX16 3-pin
More details
Output
84V 1.4–5A
Plug
GX16 3-pin
Type
External brick
Official Kaabo charger

Compatible alternatives (not made by Kaabo)

Compatible charger on AmazonCompatible charger at Fluid Free Ride

Questions about fit? Ask the seller before buying.

All models that use this charger

Stock changes often, so availability may vary by store.

Look for the UL safety certification mark on your charger's label.

Specs

BrandKaabo
TypeElectric scooter
Battery voltage72V
Charger output84V 1.4–5A
PlugGX16 3-pin (round, screw-on)
Match✓ Confirmed match

Scooter Charger Plug Types: A Visual Guide

Common questions
Can I use a universal charger on the Wolf King GT Pro?

Only use one that outputs 84V 1.4–5A and has the GX16 3-pin plug.

How do I know my charger is bad?

Common signs: the charger light stays the same color (or never lights) when plugged into the scooter, the battery never reaches full, the brick gets very hot or smells burnt, or a multimeter reads no voltage (or far below the rated output) at the plug. Also check the cable and plug pins for damage.

Where can I buy a replacement charger for the Kaabo Wolf King GT Pro?

Kaabo's official store, Amazon, or the other store listed above have the charger shown on this page.

Other Kaabo models