RideableCharger

Jetson Relay Charger

The Jetson Relay uses a 25.2V charger. The plug type has not been confirmed.

You need:

A 25.2V 0.5–1.5A charger

Before you buy

Match the plug on your old charger's label.

Match the voltage on your old charger's label; chargers with different voltages can share the same plug.

Jetson RelayJetson Relay scooter.

Charger

Official Jetson charger

Output
25.2V 0.5–1.5A
Plug
DC 5.5x2.1mm barrel
More details
Output
25.2V 0.5–1.5A
Plug
DC 5.5x2.1mm barrel
Type
External brick
Notes
FY0132520500 (25.2V 0.5A)
Jetson charger guide

Jetson's official charger for this model is PJRELAY-CH (charger model FY0132520500). Check your charger's label for that part number.

All models that use this charger

Stock changes often, so availability may vary by store.

Look for the UL safety certification mark on your charger's label.

Specs

BrandJetson
TypeElectric scooter
Battery voltage21.6V
Charger output25.2V 0.5–1.5A
PlugDC 5.5x2.1mm barrel (small round plug)
MatchCheck before buying

How to Read a Scooter or Hoverboard Charger Label

Common questions
Can I use a universal charger on the Relay?

A universal charger is not recommended.

How do I know my charger is bad?

Common signs: the charger light stays the same color (or never lights) when plugged into the scooter, the battery never reaches full, the brick gets very hot or smells burnt, or a multimeter reads no voltage (or far below the rated output) at the plug. Also check the cable and plug pins for damage.

Where can I buy a replacement charger for the Jetson Relay?

Contact Jetson's support for an original replacement.

Other Jetson models