RideableCharger

Jetson Lyra Charger

The Jetson Lyra uses a charger made for this model. Check its voltage and plug before buying.

You need:

An official Jetson charger, part PJLYRA-CH

Jetson Lyra

Charger

Official Jetson charger

Part number
PJLYRA-CH
More details
Type
Brand-specific charger
Notes
original SKUs PJDASH-CH / PJLYRA-CH / PJRING-CH
Official Jetson charger
All models that use this charger

Stock changes often, so availability may vary by store.

Check the voltage before you buy.

24V hoverboards need a 29.4V charger and 36V hoverboards need a 42V charger, and both often use the same 3-prong plug. Check the output voltage on your old charger's label before buying.

29.4V vs 42V hoverboard chargers explained
Look for the UL safety certification mark on your charger's label.

Specs

BrandJetson
TypeHoverboard
Battery voltageoriginal
MatchCheck before buying
Common questions
Can I use a universal charger on the Lyra?

A universal charger is not recommended. Use the charger made for this model.

How do I know my charger is bad?

Common signs: the charger light stays the same color (or never lights) when plugged into the hoverboard, the battery never reaches full, the brick gets very hot or smells burnt, or a multimeter reads no voltage (or far below the rated output) at the plug. Also check the cable and plug pins for damage.

Where can I buy a replacement charger for the Jetson Lyra?

Jetson's official store has the charger shown on this page.

Other Jetson models