Jetson Knight Charger
The Jetson Knight uses a 42V charger with a DC 5.5x2.1/2.5mm barrel (small round plug).
You need:
An official Jetson charger, part PJKNIGH-CH
Before you buy
Match the voltage on your old charger's label; chargers with different voltages can share the same plug.
Charger
Official Jetson charger
- Part number
- PJKNIGH-CH
More details
- Type
- Brand-specific charger
- Notes
- 42V 2A (HLT-180-4202000 / XHK-800-4220 / XH-CH42200P)
Stock changes often, so availability may vary by store.
Specs
| Brand | Jetson |
|---|---|
| Type | Electric scooter |
| Battery voltage | 36V |
| Match | Check before buying |
Common questions
Can I use a universal charger on the Knight?
A universal charger is not recommended. Use the charger made for this model.
How do I know my charger is bad?
Common signs: the charger light stays the same color (or never lights) when plugged into the scooter, the battery never reaches full, the brick gets very hot or smells burnt, or a multimeter reads no voltage (or far below the rated output) at the plug. Also check the cable and plug pins for damage.
Where can I buy a replacement charger for the Jetson Knight?
Jetson's official store has the charger shown on this page.
Other Jetson models
- FlashFlash24V · 29.4V 0.4–2ACheck your charger's label
- Hali XHali X24V · 29.4V 0.4–2ACheck your charger's label
- ImpactImpact24V · 29.4V 0.4–2ACheck your charger's label
- InputInput24V · 29.4V 0.4–2ACheck your charger's label
- LuminoLumino24V · 29.4V 0.4–2ACheck your charger's label
- RaveRave24V · 29.4V 0.4–2ACheck your charger's label