RideableCharger

Jetson Copperhead Charger

The Jetson Copperhead uses a 42V charger. The plug type has not been confirmed.

You need:

A 42V 1.5–2A charger

Before you buy

Match the plug on your old charger's label.

Match the voltage on your old charger's label; chargers with different voltages can share the same plug.

Jetson CopperheadJetson Copperhead scooter.

Charger

Official Jetson charger

Output
42V 1.5–2A
Plug
DC 5.5x2.1/2.5mm barrel
More details
Output
42V 1.5–2A
Plug
DC 5.5x2.1/2.5mm barrel
Type
External brick
Notes
FY0634201500 (42V 1.5A)
Jetson charger guide

Jetson's official charger for this model is PJCOPHD-CH (charger model FY0634201500). Check your charger's label for that part number.

All models that use this charger

Stock changes often, so availability may vary by store.

Look for the UL safety certification mark on your charger's label.

Specs

BrandJetson
TypeElectric scooter
Battery voltage36V
Charger output42V 1.5–2A
PlugDC 5.5x2.1/2.5mm barrel (small round plug)
MatchCheck before buying

Are Universal Scooter Chargers Safe?

Common questions
Can I use a universal charger on the Copperhead?

A universal charger is not recommended.

How do I know my charger is bad?

Common signs: the charger light stays the same color (or never lights) when plugged into the scooter, the battery never reaches full, the brick gets very hot or smells burnt, or a multimeter reads no voltage (or far below the rated output) at the plug. Also check the cable and plug pins for damage.

Where can I buy a replacement charger for the Jetson Copperhead?

Contact Jetson's support for an original replacement.

Other Jetson models