Hover-1 Rally Charger
The Hover-1 Rally uses a 42V charger. The plug type has not been confirmed.
You need:
A 42V 1.5–2A charger
Before you buy
Match the plug on your old charger's label.
Match the voltage on your old charger's label; chargers with different voltages can share the same plug.
Hover-1 Rally
Charger
Official Hover-1 charger
- Output
- 42V 1.5–2A
- Plug
- DC 5.5x2.1/2.5mm barrel
More details
- Output
- 42V 1.5–2A
- Plug
- DC 5.5x2.1/2.5mm barrel
- Type
- External brick
- Notes
- original PTS-CHG-ES6. Third-party: 42V, 5.5x2.5mm
Stock changes often, so availability may vary by store.
Look for the UL safety certification mark on your charger's label.
Specs
| Brand | Hover-1 |
|---|---|
| Type | Electric scooter |
| Battery voltage | 36V |
| Charger output | 42V 1.5–2A |
| Plug | DC 5.5x2.1/2.5mm barrel (small round plug) |
| Match | Check before buying |
Common questions
Can I use a universal charger on the Rally?
A universal charger is not recommended.
How do I know my charger is bad?
Common signs: the charger light stays the same color (or never lights) when plugged into the scooter, the battery never reaches full, the brick gets very hot or smells burnt, or a multimeter reads no voltage (or far below the rated output) at the plug. Also check the cable and plug pins for damage.
Where can I buy a replacement charger for the Hover-1 Rally?
Hover-1's official store has the charger shown on this page.