Hover-1 H1 Charger
The Hover-1 H1 uses a charger made for this model. Check its voltage and plug before buying.
You need:
An official Hover-1 charger, part PTS-CHG-HB4
Charger
Official Hover-1 charger
- Part number
- PTS-CHG-HB4
More details
- Type
- Brand-specific charger
Stock changes often, so availability may vary by store.
Check the voltage before you buy.
24V hoverboards need a 29.4V charger and 36V hoverboards need a 42V charger, and both often use the same 3-prong plug. Check the output voltage on your old charger's label before buying.
29.4V vs 42V hoverboard chargers explainedSpecs
| Brand | Hover-1 |
|---|---|
| Type | Hoverboard |
| Battery voltage | original |
| Match | Check before buying |
Common questions
Can I use a universal charger on the H1?
A universal charger is not recommended. Use the charger made for this model.
How do I know my charger is bad?
Common signs: the charger light stays the same color (or never lights) when plugged into the hoverboard, the battery never reaches full, the brick gets very hot or smells burnt, or a multimeter reads no voltage (or far below the rated output) at the plug. Also check the cable and plug pins for damage.
Where can I buy a replacement charger for the Hover-1 H1?
Hover-1's official store has the charger shown on this page.