RideableCharger

Dualtron Thunder 2 Charger

The Dualtron Thunder 2 uses a 84V charger. The plug type has not been confirmed.

You need:

A 84V 1.4–5A charger

Before you buy

Match the plug on your old charger's label.

Match the voltage on your old charger's label; chargers with different voltages can share the same plug.

Dualtron Thunder 2

Charger

Official Dualtron charger

Output
84V 1.4–5A
Plug
GX16 3-pin
More details
Output
84V 1.4–5A
Plug
GX16 3-pin
Type
External brick
Official Dualtron charger
All models that use this charger

Stock changes often, so availability may vary by store.

Look for the UL safety certification mark on your charger's label.

Specs

BrandDualtron
TypeElectric scooter
Battery voltage72V
Charger output84V 1.4–5A
PlugGX16 3-pin (round, screw-on)
Match✓ Confirmed match

Scooter Charger Plug Types: A Visual Guide

Common questions
Can I use a universal charger on the Thunder 2?

A universal charger is not recommended.

How do I know my charger is bad?

Common signs: the charger light stays the same color (or never lights) when plugged into the scooter, the battery never reaches full, the brick gets very hot or smells burnt, or a multimeter reads no voltage (or far below the rated output) at the plug. Also check the cable and plug pins for damage.

Where can I buy a replacement charger for the Dualtron Thunder 2?

Dualtron's official store has the charger shown on this page.

Other Dualtron models