Razor C35 sealed lead-acid Charger
The Razor C35 SLA uses a original charger. The plug type has not been confirmed.
You need:
A original charger
Before you buy
Match the plug on your old charger's label.
Match the voltage on your old charger's label; chargers with different voltages can share the same plug.
Razor C35 SLA
Charger
Official Razor charger
- Part number
- W13113291014
- Output
- original
More details
- Output
- original
- Type
- External brick
- Notes
- Razor part number W13113291014.
Stock changes often, so availability may vary by store.
Look for the UL safety certification mark on your charger's label.
Specs
| Brand | Razor |
|---|---|
| Type | Electric scooter |
| Battery voltage | sealed lead-acid |
| Charger output | original |
| Match | Check before buying |
Common questions
Can I use a universal charger on the C35 sealed lead-acid?
A universal charger is not recommended.
How do I know my charger is bad?
Common signs: the charger light stays the same color (or never lights) when plugged into the scooter, the battery never reaches full, the brick gets very hot or smells burnt, or a multimeter reads no voltage (or far below the rated output) at the plug. Also check the cable and plug pins for damage.
Where can I buy a replacement charger for the Razor C35 sealed lead-acid?
Razor's official store has the charger shown on this page.
Other Razor models
- E100E10024V sealed lead-acid · 24V 0.6–1.5A (sealed lead-acid)
- E125E12524V sealed lead-acid · 24V 0.6–1.5A (sealed lead-acid)
- E150E15024V sealed lead-acid · 24V 0.6–1.5A (sealed lead-acid)
- E175E17524V sealed lead-acid · 24V 0.6–1.5A (sealed lead-acid)
- E200E20024V sealed lead-acid · 24V 0.6–1.5A (sealed lead-acid)
- E200SE200S24V sealed lead-acid · 24V 0.6–1.5A (sealed lead-acid)