Hiboy S2 Pro Charger
The Hiboy S2 Pro uses a 42.5V charger with a DC 5.5x2.1/2.5mm barrel (small round plug).
You need:
An official Hiboy 42.5V 2.0A charger
Before you buy
Match the voltage on your old charger's label; chargers with different voltages can share the same plug.
Hiboy S2 Pro
Charger
Official Hiboy charger
More details
- Official charger output
- 42.5V 2.0A
- Type
- Brand-specific charger
- Notes
- original S2 Pro charger (42V)
Stock changes often, so availability may vary by store.
Look for the UL safety certification mark on your charger's label.
Specs
| Brand | Hiboy |
|---|---|
| Type | Electric scooter |
| Battery voltage | 36V |
| Official charger output | 42.5V 2.0A |
| Match | Check before buying |
Common questions
Can I use a universal charger on the S2 Pro?
A universal charger is not recommended. Use the charger made for this model.
How do I know my charger is bad?
Common signs: the charger light stays the same color (or never lights) when plugged into the scooter, the battery never reaches full, the brick gets very hot or smells burnt, or a multimeter reads no voltage (or far below the rated output) at the plug. Also check the cable and plug pins for damage.
Where can I buy a replacement charger for the Hiboy S2 Pro?
Hiboy's official store has the charger shown on this page.