Gyroor H30 (kids) Charger
The Gyroor H30 (kids) uses a 25.2V charger. The plug type has not been confirmed.
You need:
A 25.2V 0.5–1.5A charger
Before you buy
Match the plug on your old charger's label.
Match the voltage on your old charger's label; chargers with different voltages can share the same plug.
Gyroor H30 (kids)
Look for the UL safety certification mark on your charger's label.
Specs
| Brand | Gyroor |
|---|---|
| Type | Electric scooter |
| Battery voltage | 21.6V |
| Charger output | 25.2V 0.5–1.5A |
| Plug | DC 5.5x2.1mm barrel (small round plug) |
| Match | Check before buying |
Common questions
Can I use a universal charger on the H30 (kids)?
A universal charger is not recommended.
How do I know my charger is bad?
Common signs: the charger light stays the same color (or never lights) when plugged into the scooter, the battery never reaches full, the brick gets very hot or smells burnt, or a multimeter reads no voltage (or far below the rated output) at the plug. Also check the cable and plug pins for damage.
Where can I buy a replacement charger for the Gyroor H30 (kids)?
Contact Gyroor's support for an original replacement.