Gotrax Pilot Charger
The Gotrax Pilot uses a 42V charger with a DC 5.5x2.1/2.5mm barrel (small round plug).
You need:
An official Gotrax 42V 0.85A charger
Before you buy
Match the voltage on your old charger's label; chargers with different voltages can share the same plug.
Gotrax Pilot
Charger
Official Gotrax charger
More details
- Official charger output
- 42V 0.85A
- Type
- Brand-specific charger
- Notes
- Original charger: 42V 0.85A. Check whether your label says V14 or Pilot.
Stock changes often, so availability may vary by store.
Look for the UL safety certification mark on your charger's label.
Specs
| Brand | Gotrax |
|---|---|
| Type | Electric scooter |
| Battery voltage | 36V |
| Official charger output | 42V 0.85A |
| Match | Check before buying |
Common questions
Can I use a universal charger on the Pilot?
A universal charger is not recommended. Use the charger made for this model.
How do I know my charger is bad?
Common signs: the charger light stays the same color (or never lights) when plugged into the scooter, the battery never reaches full, the brick gets very hot or smells burnt, or a multimeter reads no voltage (or far below the rated output) at the plug. Also check the cable and plug pins for damage.
Where can I buy a replacement charger for the Gotrax Pilot?
Gotrax's official store has the charger shown on this page.