Gotrax GKS Pro Charger
The Gotrax GKS Pro uses a 29.4V charger with a 3-prong round (round, 3 pins).
You need:
A 29.4V 0.4–2A charger with a 3-prong round plug
Before you buy
Match the voltage on your old charger's label; chargers with different voltages can share the same plug.
Charger
Official Gotrax charger
- Output
- 29.4V 0.4–2A
- Plug
- 3-prong round
More details
- Output
- 29.4V 0.4–2A
- Plug
- 3-prong round
- Type
- External brick
- Notes
- Kids. Original charger: 29.4V 0.6A
Compatible alternatives (not made by Gotrax)
Questions about fit? Ask the seller before buying.
We may earn a small commission if you buy through these links, at no extra cost to you.
Stock changes often, so availability may vary by store.
Specs
| Brand | Gotrax |
|---|---|
| Type | Electric scooter |
| Battery voltage | 24V |
| Charger output | 29.4V 0.4–2A |
| Plug | 3-prong round (round, 3 pins) |
| Match | ✓ Confirmed match |
29.4V vs 42V Hoverboard Chargers: How to Tell Which You Need
Common questions
Can I use a universal charger on the GKS Pro?
Only use one that outputs 29.4V 0.4–2A and has the 3-prong round plug.
How do I know my charger is bad?
Common signs: the charger light stays the same color (or never lights) when plugged into the scooter, the battery never reaches full, the brick gets very hot or smells burnt, or a multimeter reads no voltage (or far below the rated output) at the plug. Also check the cable and plug pins for damage.
Where can I buy a replacement charger for the Gotrax GKS Pro?
Gotrax's official store or Amazon have the charger shown on this page.